|
|
Here I'm rebbeting the doors and the front to put a MDF panel in.
|
|
Close up of the bit.
|
|
I'm going to mortise for the front toe kick.
|
|
I'm going to use a mortise with clearance on the front toe kick, so I don't break the arch when I'm fitting it to the front of the carcase.
|
|
Fitting the top panel, I used the Domino here too.
|
|
|
Now with the top panel and the toekick glued, I'll turn my attention to the doors.
|
|
I already had the LR32 hole drilling jig setup for another project, so I used it to drill the cup holes in the doors.
|
|
|
|
